S5 Quattro Coupe V8-4.2L (CAUA) (2009)
/Page-1578001.png)
Control Arm Bushing: Service and Repair
Track Control Arm Bearing
Track Control Arm Bearing
On Wheel Bearing Housing Side
Special tools, testers and auxiliary items required
‹› Thrust plate (VW 402)
‹› Thrust Disc (VW 412)
‹› Assembly tool (3301)
‹› Assembly tool (3346)
‹› Assembly tool (T10030)
‹› Assembly paste (G 052 109 A2)
‹› Hold track control arm firmly in position while pressing bearing out and in.
Bearing, Removing
-
Remove track control arm => [ Track Control Arm ] See: Service and Repair/Front Suspension/Track Control Arm.
-
Mark installation depth - arrow - on bearing - 1 -.
Use a waterproof felt-tip pen for marking.
-
Install special tools as shown in the illustration.
1. Thrust disc (VW 412)
2. Press piece (T10030/1)
