S5 Quattro Coupe V8-4.2L (CAUA) (2009)
Stabilizer Bar: Service and Repair
Stabilizer Bar Coupling Rod
Stabilizer Bar Coupling Rod
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1331)
‹› Installation lubricant
Removing
-
Determine dimension - a - from center of wheel to lower edge of wheel housing before starting work while vehicle is resting on its wheels.
-
Place vehicle on a hoist.
-
Remove wheels.
CAUTION!
‹› Do not damage the paint on the stabilizer bar when removing and installing.
-
Remove bolt - 4 -.
-
Remove nut - 3 -, washer - 2 - and bolt - 1 -.
The stabilizer bar - 4 - is completely removed and installed with rubber bushings - 1 - and clamps - 3 -. Do not remove clamps and rubber bushings.