S5 Quattro Coupe V8-4.2L (CAUA) (2009)
/Page-1632001.png)
Wheel Bearing: Removal and Replacement
Removal and Installation
Wheel Bearing
Removing
-
Remove wheel bearing housing => [ Wheel Bearing Housing ] See: Rear Knuckle/Service and Repair.
-
Clamp wheel bearing housing in a vise with aluminum protective covers.
-
Remove bolts - 1 - and wheel bearing unit - 2 -.
CAUTION!
‹› Avoid contaminating with dirt and damaging the seal when setting down/storing.
The wheel bearing - 1 - must always face up.
