S5 Quattro Coupe V8-4.2L (CAUA) (2009)
-
Remove the clutch master cylinder - 1 - and guide it out through the opening for the engine wiring harness.
-
Release connector - 5 - and pull off.
Installing
Install in reverse sequence; note the following points:
-
Connect connector - 5 -.
-
Insert the clutch master cylinder - 1 -.
-
Pull the clutch master cylinder into the footwell in the - direction of arrow A -. Release in the - direction of arrow B - using the 32 mm open end
wrench (3355).