S5 Quattro Coupe V8-4.2L (CAUA) (2009)
/Page-1094001.png)
Clutch Pedal Assembly: Removal and Replacement
Pedal Assembly Overview
Pedal Assembly Overview
CAUTION!
The amount of brake pedal travel must not be decreased by additional floor mats.
‹› Lubricate the various bearing and contact surfaces with grease (G 000 450 02).
‹› Make sure that no brake fluid escapes into the footwell or into the plenum chamber or onto the transmission below. If this happens, these areas
must be cleaned thoroughly.
1
Mounting bracket
‹› With the brake pedal
‹› Removing and installing => [ Clutch Master Cylinder ] See: Clutch Hydraulic System/Clutch Master Cylinder/Service and Repair.
2
Bushing
3
Clutch pedal
‹› Removing and installing => [ Clutch Master Cylinder ] See: Clutch Hydraulic System/Clutch Master Cylinder/Service and Repair.
4
Clutch pedal stop
5
Mounting pins