S5 Quattro Coupe V8-4.2L (CAUA) (2009)
Constant Velocity Joint: Overhaul
Outer CV Joint
Outer CV Joint
Special tools, testers and auxiliary items required
‹› CV joint boot clamp tool (3340)
‹› Circlip pliers (commercially-available)
Removing Outer CV Joint of 88 mm or 108 mm Diameter
-
Secure drive axle with protective covers in vise clamp.
-
Open clamp using hose clamp pliers (3340).
Insert pliers (3340) at front of clamp, as shown in the illustration.
-
Slide back protective boot.
-
Strike a copper or brass drift - A - on CV joint inner race with a hammer.
-
Remove joint and protective joint boot.
-
Remove circlip.
Outer Constant Velocity Joint, 88 mm or 100 mm, Installing