Audi Workshop Service and Repair Manuals

-

Remove wheel bearing unit.

CAUTION!
‹› Avoid contaminating with dirt and damaging the seal when setting down/storing. 

The wheel bearing - 1 - must always face up.

-

Always set wheel bearing down on wheel hub - 2 -. 

-

Servicing wheel bearing unit => [ Wheel Bearing ] See: Steering and Suspension/Suspension/Suspension Strut / Shock Absorber/Service and
Repair/Overhaul/Front Suspension/Wheel Bearing.

Installing

Installation is in reverse order of removal. Observe the following when doing so:

Tightening specifications: => [ Wheel Bearing and Housing Assembly Overview ] See: Wheel Bearing and Housing Assembly Overview