S5 Quattro Coupe V8-4.2L (CAUA) (2009)
Installing the flange shaft ball bearing
‹› The shoulder on the tube 60 mm diameter (VW 415 A) - arrow - faces toward the thrust disc (VW 412).
-
Then press the spacer sleeve => [ (Item 6) Spacer sleeve ] See: Transfer Case/Service and Repair/0B4A Transmission/Center Differential Housing
Assembly Overview in using the tube 60 mm diameter (VW 415 A).
Lightly lubricate the outer circumference of the new seal and drive it in as far as the stop.