S6 V8-4.2L (BBD) (2004)
/Page-5000005.png)
^
Take care not to cant bonded rubber bushing at start of installation, otherwise outer race could be damaged.
^
Men installing bonded rubber bushing w4h special tool V.A. G 1459 B replace with correct bushing.
^
Plug in connector for level sender.
^
Use engine/transmission jack V.A.G 1383 A to raise subframe.
Use new bolts.
^
Tighten subframe bolts to 110 Nm plus an additional 90° 1/4 turn.
