S6 V8-4.2L (BBD) (2004)
/Page-5150002.png)
-
Check wiring harness connection between control module for solar operation -J355- and -E- contacts for short circuit.
-
Check both -E- contacts for short circuit to sun roof (-F-).
-
Check fresh air blower -V2- for short circuit (using solar cell separation relay -J309). See "Electrical Wiring Diagrams".
-
Insulating discs -C- and -D- must be installed between screws -A-, -B- and contact -E-.
-
If there is a short circuit between contract -E- and the sunroof (-F-), a fabric adhesive tape must be placed on the contact surface -G-. The adhesive
tape should be pierced carefully at holes -H-.
