S6 V8-4.2L (BBD) (2004)
Seat Back: Service and Repair
Backrest Hinge Trim
Backrest Hinge Trim, Removing And Installing
1
-
Mounting trim
Removing
-
Remove seat.
-
Remove mounting trim -1- downward, so that pins -4- and tabs -5- are pulled out of catches -6- and -7-.
-
Pull out mounting trim -1-.
Installing
-
On same side of side airbag module, insert insertion edge -2- under side airbag module in direction of arrow.
-
Press mounting trim -1- on in a straight line, so that pins -4- and tabs -5- engage in catches - 6- and -7-.
2
-
Insertion edge
-
Only on same side of side airbag module.
3
-
Backrest
4
-
Pin
5
-
Clip
6
-
Pin catch
7
-
Tab catches