S6 V8-4.2L (BBD) (2004)
/Page-1235003.png)
-
Screw clamping bolt 3242 for crankshaft into plug hole and tighten.
Note: The toothed belt tensioning element is oil-damped and can be compressed slowly by applying constant pressure.
-
Using 8 mm Allen key, turn toothed belt tensioning lever -1- in direction of arrow until tensioning element -2 is compressed far enough to insert
pin T40011 in drilling and plunger.
-
Install camshaft bar T40005 on securing plates of both camshafts.
-
Loosen both camshaft bolts by approximately 5 turns.
-
Remove camshaft bar T40005.
