S6 V8-4.2L (BBD) (2004)
Evaporative Emission Control Canister: Locations
EVAP Canister/Leak Detection System - Component Overview
1
Cap nut - 10 Nm
2
Cover
-
For EVAP canister
3
Stud bolt - 15 Nm
4
Sealing piece
5
Vent line
-
to Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
6
Vent line
-
from gravity valve at fuel tank
7
Vacuum line
-
to Leak Detection Pump (LDP) -V144-
8
Cable tie
-
for securing vacuum line to Leak Detection Pump (LDP) bracket
9
Leak Detection Pump (LDP) -V144-
-
Component location: Under wheel housing liner in rear left wheelhouse
10
Electrical harness connector
-
Black
11
Connection hose
-
Leak Detection Pump (LDP)/EVAP canister
-
Pressure side
-
to remove, press release button at connection on Leak Detection Pump (LDP)
12
10 Nm
13
Air filter
-
for Leak Detection Pump (LDP) -V144-
-
no maintenance procedure
14
Sealing piece