S6 V8-4.2L (BBD) (2004)
10
Retaining ring
11
Seal insert
-
For gas station fuel nozzle
-
Replace if damaged
12
Seal
-
Replace if damaged
13
Fuel filler cap
14
Spring nut - 1.3 Nm
15
Fuel filler neck with expansion tank
-
With valves and hoses
-
Must be replaced as complete unit
16
Bolts M8 x 30 with attached washer
-
23 Nm (17 ft lb)
17
Bolts M8 x 30 with attached washer
-
23 Nm (17 ft lb)
18
Plastic nut - 2 Nm
Fig. 1 Installation position of Ground wire
NOTE: Check installation position with fuel tank or fuel filler neck removed
-
If necessary unbolt expansion tank -1- -arrows-
-
Route and connect Ground wire as shown -arrow-.
-
Ensure that harness connector for Ground (GND) connection is properly seated on metal ring (Ground clamp) on fuel filler neck.
-
Check if contact terminal (tongue) at fastening hole is properly locked in.