audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Fuel Fill Neck W/Expansion Tank, Removing and Installing (AWD)|Page 5774 > < Fuel Fill Neck W/Expansion Tank, Removing and Installing (AWD)|Page 5772
Page 3
background image

-

Remove heat shield for fuel filler neck above rear muffler -arrows-.

NOTE:  For easy access lift rear muffler out of hanger.

-

Remove right-rear wheelhousing liner.

-

Remove right rear wheel

NOTE:  To ease repair process, remove muffler from muffler hangers.

-

Remove cover for EVAP canister below spare wheel molding.

-

Remove vent line -arrow- from EVAP canister.

WARNING:

-

When removing fuel filler neck with expansion tank the fuel tank should only be 1/2 full. Drain fuel tank if necessary.

-

However, when loosening hose for filler pipe some fuel may escape.

-

Cut cable tie -2-.

-

Remove vent line -3-.

-

Loosen hose clamp -1- for filler pipe and detach filler pipe.

Fuel Fill Neck W/Expansion Tank, Removing and Installing (AWD)|Page 5774 > < Fuel Fill Neck W/Expansion Tank, Removing and Installing (AWD)|Page 5772