S6 V8-4.2L (BBD) (2004)
/Page-898002.png)
-
Press keys 0 and 6 for "End output" function and press Q key to confirm entry.
-
Switch ignition off.
Evaluation of display group 002
Display Zone 3
Evaluation of display group 002
Display Zone 4
Checking voltage supply to MAF sensor
-
Disconnect connector from MAF sensor.
-
Connect hand-held multimeter for voltage measuring to socket 2 of connector and engine Ground.
-
Operate starter briefly.
Specified value: approx. battery voltage
NOTE: Voltage supply to MAF sensor is from fuel pump relay. If battery voltage is not present:
If battery voltage is not present:
