S6 V8-4.2L (BBD) (2004)
Power Steering Pump: Locations
Power steering pump, assembly overview
Vehicles with 8-cylinder gasoline engine
Note:
^
Always replace seals
^
Do not reuse fluid you have drained.
^
Hydraulic fluid. Pail No. G 002 000
^
When replacing Me power steering pump always check alignment of the pulleys for A/C compressor and power steering pump.
1. Screw and washer assembly, 22 Nm
2. Bracket
3. Socket head bolt, 22 Nm
^
Rear mount for power steering pump to bracket
4. Bushing, slotted
^
Used to balance out tolerances
5. Expansion hose
^
Power steering pump - steering gear
^
Note installation position:
-
Angle -a- : approximately 75°
6. Banjo bolt, 47 Nm
7. Seals
^
Always replace
8. Intake hose
^
Power steering pump - power steering fluid reservoir
^
Note installation position:
-
Angle -b- : approximately 90°
9. Banjo bolt, 47 Nm
10. Power steering pump