S6 V8-4.2L (BBD) (2004)
Fig. 4 Pressing bearing Inner race off wheel hub.
Fig. 5 Pressing wheel hub into wheel bearing with 75 mm diameter
Fig. 6 Pressing wheel hub Into wheel bearing with 82 mm diameter
^
When pressing in, pressure piece -VW511- must rest only against bearing inner race.
Installing
Installation is the reverse of removal.
^
Observe notes when installing drive axle
Tightening torques:
M14, drive axle to wheel hub ........................................................................................................................................................................ 115 Nm + 180°
Use new bolt!
M16, drive axle to wheel hub .................................................................................................................................................................... 190 Nm + 180°