S6 V8-4.2L (BBD) (2004)
/Page-2680002.png)
Tightening sequence:
^
1. Stage: Tighten bolts -1-, -2- and -3- by hand.
^
2. Stage: Tighten bolts -1- to -12- to final torque in sequence - 23 Nm.
^
Check and top off transmission fluid in rear final drive of automatic transmission.
^
Install right drive axle
^
Install front left and front right exhaust pipes with de-coupling element.
Tightening torques
Differential cover to transmission housing .................................................................................................................................................................. 23 Nm
Transmission support to transmission M10 ................................................................................................................................................................. 40 Nm
Transmission support to transmission bearing M10 .................................................................................................................................................... 50 Nm
Transmission bearing to subframe M8 ........................................................................................................................................................................ 23 Nm
Right drive flange to transmission ............................................................................................................................................................................... 25 Nm
Heat shield to transmission .......................................................................................................................................................................................... 23 Nm
