S6 V8-4.2L (BBD) (2004)
Removing
^
Remove left drive flange.
^
Remove circlip (arrow A) for ball bearing.
^
Press out drive flange from mounting bracket for left drive flange using VW412th rust disc.
Set mounting bracket onto VW401 and VW402 thrust plates while doing so.
Note: Hold drive flange with one hand to keep it from falling out toward bottom.
^
Pry out sealing ring from mounting bracket for left drive flange using VVV681 extractor lever.
Installing
^
Push in O-ring using 3384 assembly mandrel to pressure piece stop.