S6 V8-4.2L (BBD) (2004)
/Page-2753001.png)
Shifter A/T: Service and Repair
Selector Lever, Disassembling and Assembling
Selector lever, disassembling and assembling
^
Remove selector lever.
Disassembling
^
Drive out mounting bolt with drift.
^
Push out slide cover together with Tiptronic spring while lifting pull rod from selector lever.
^
Release spring and remove pull rod and spring from selector lever.
Assembling
^
Place spring -13- on pull rod -A-.
^
Insert pull rod with spring in selector lever.
Installation position:
Round part -arrow- and cutting point in driving direction.
^
Check whether pull rod slides in both guides -C- of selector lever.
