S6 V8-4.2L (BBD) (2004)
Differential Mount: Service and Repair
Bonded Rubber Bushing For Crossmember, Pressing Out and Pressing In
Bonded rubber bushing for crossmember, pressing out and pressing in
Fig. 1 Mark Installation position of bonded rubber bushing In cross member
^
Mark installation position with a felt-tip pen, for example (arrows).
Fig. 2 Pressing bonded rubber bushing out of crossmember
Fig. 3 Pressing bonded rubber bushing into crossmember
^
Position bonded rubber bushing so that one of the rubber knobs -1- on refer to Fig. 1 (illustration N42-0225) is opposite the marking (arrow).