S6 Quattro Sedan V10-5.2L (BXA) (2007)
6. Distance Laser VAS 6350/2
-
Notes on operation Operating instructions
7. Spirit level on calibration platform
-
For checking horizontal position of calibration platform
8. -
Left-side angle bracket for Distance Laser VAS 6350/2 mount.
9. -
Measuring field of calibration platform
-
Distance to rear wheel axle 1.47 m - 1.90 m - dimension A -
Overview of assembled measuring device, Avant
1. Left paddle
2. Right paddle
3. Right-side angle bracket for Distance Laser VAS 6350/2 mount.
4. Plastic foot
-
Three on underside of calibration platform
-
Adjustable for aligning horizontal position of calibration platform
5. Linear laser on calibration platform
-
Switching on and off Operating instructions
6. Distance Laser VAS 6350/2
-
Notes on operation Operating instructions
7. Spirit level on calibration platform
-
For checking horizontal position of calibration platform
8. Left-side angle bracket for Distance Laser VAS 6350/2 mount.
9. Measuring field of calibration platform
-
Distance to rear wheel axle 1.47 m - 1.90 m - dimension A -
Setting up measuring device
-
Check which hole circle the rims have.
-
Equip wheel pick-ups appropriately.
-
To do so, secure three wheel bolt adapters in the hole circle to each wheel pick-up.
-
Attach paddles to both wheel pick-ups and secure them with clamping screw.
-
Set the wheel pick-ups on to wheel mounting bolts at the rear wheels.