S6 Quattro Sedan V10-5.2L (BXA) (2007)
Rear Door Window Regulator: Service and Repair
Window Frame and Window Regulator
Window Frame and Window Regulator
1
Window frame
Removal:
‹› Remove door trim.
‹› Remove window regulator motor
‹› Disconnect electrical connectors.
‹› Remove sheet metal screws - 6 - and collar screw- 7 -.
‹› Remove fitting screws - 5 - and collar screws- 3 - and lift window frame with window regulator up and out of door.
Installing:
‹› Insert window frame and window regulator into door from above.
‹› Knock in the upper profile halves of door-side gasket into window frame at top.
‹› Screw front and rear collar screws - 3 - in lightly.
-
Torx(R) screw as well- 8 -.