S6 Quattro Sedan V10-5.2L (BXA) (2007)
Removing and installing rear lid hinges
‹› For easier adjustment of the rear lid hinges, use gradations marked on the hinges.
-
Loosen nut - 1 -. Tightening specification 21 Nm
-
Remove the nut - 2 -. Tightening specification 21 Nm.
-
Lift off lid from hinge.
-
Remove bolts - 3 - and - 4 -. Tightening specification 21 Nm.
-
Only loosen center bolt - 5 -. Tightening specification 21 Nm.
-
Remove hinge - 6 -.
-
To install, perform the steps used in removal in reverse order.
Gas-filled strut, removing and installing
‹› When removing or installing the gas-filled strut, push back the opened rear lid only slightly so as to avoid damaging components.
-
Lift retaining springs in succession on both ends using screwdriver and remove gas-filled strut.