S6 Quattro Sedan V10-5.2L (BXA) (2007)
Trunk / Liftgate Shock / Support: Service and Repair
Gas-filled Strut, Venting
-
Clamp gas-filled strut in vice area - x -. Dimension of - x - = 50 mm (2 in.).
CAUTION: Clamp only within this area, otherwise accident could occur.
Always wear eye protection when performing this procedure.
-
Using saw, cut into cylindrical part of strut at point within first third of cylinders length (measured from cover edge at piston rod end of cylinder).