S6 Quattro Sedan V10-5.2L (BXA) (2007)
‹› When pulling in bearing, groove is masked by tool.
-
Observe different bearing versions.
Bearing - 2 - with yellow dot - arrow B - must be installed on right side.
-
Position bearing - 2 - with groove - 1 - at your marking - arrow A -.
-
Attach tools and bearing at subframe, as shown in illustration. Marking - arrow A - on bearing and marking - arrow B - on subframe must align.
1. Spindle (3346/2)
2. Press piece (T40144)
3. Mount
4. Washer (T40032/2)
-
Pull bearing into subframe until stop.
‹› If paint damage has occurred during bearing replacement, repair using corrosion protection, primer and black top coat.