S6 Quattro Sedan V10-5.2L (BXA) (2007)
-
Remove the front ashtray insert.
-
Remove bolts - 1 - and - 2 -.
-
Release ashtray - 3 - using a screwdriver - arrow -, attach screwdriver at opening - 4 - to do so.
-
Remove housing of front ashtray.
-
Disconnect electrical harness connector, if present.
-
Reach through opening of ashtray and press out Access/Start Authorization Button (E408) - item 1 - - arrow -.
-
Unplug connector.
Installing
Install in reverse order of removal, observing the following:
-
Install the Climatronic Control Module (J255).
Tightening Specifications
Parking Brake Pressure Switch
Special tools, testers and auxiliary items required
‹› Trim Removal Wedge (3409)
Removing
-
Remove rear center console.
-
Bring seats into rear most seat position.
-
On vehicles with automatic transmission, place selector lever in position "S".
-
Switch off ignition and remove ignition key.
-
Reach from bottom into recesses into recesses at Climatronic Control Module (J255) (control head).