S6 Quattro Sedan V10-5.2L (BXA) (2007)
Trim Panel: Service and Repair
Roof Panel Trim
Roof Panel Trim, Removing And Installing
1
-
Roof panel trim
-
Removal
-
Unclip roof panel trim - 1 - with clamps - 4 - (4x).
-
To do this, push roof panel trim - 1 - downward.
When unclipping, do not damage catches - 3 - on roof panel trim - 1 - under any circumstances.
-
Remove roof end trim - 1 -.
-
Installing
-
Check clamps - 4 - (4x) for damage and deformity.
Replace damaged or deformed clamps.
-
Before installing roof panel trim - 1 -, make sure clamps - 4 - are positioned correctly.
-
Position placement of roof panel trim - 1 - with pins - 2 -.
-
Clip roof panel trim - 1 - in with clamps - 4 - (4x) and catches - 3 -.
Ensure roof panel trim - 1 - is held securely.
2
-
Pins
-
Joined securely with roof panel trim - 1 -
3
-
Catches
-
Joined securely with roof panel trim - 1 -
4
-
Clamps, (4x)
-
Replace if damaged or deformed