S6 Quattro Sedan V10-5.2L (BXA) (2007)
Power Seat Motor: Service and Repair
Drivers Seat Inclination Adjustment Motor V243 or V244 , Removing and Installing
Drivers Seat Inclination Adjustment Motor V243 Or V244, Removing And Installing
Removing
CAUTION:
-
Observe safety precautions for work on airbags.
-
Before handling airbag units (e.g. disconnecting electrical connector), the person handling it must "electrostatically discharge". This can
be done by touching door striker, for example.
-
Remove seat.
-
Attach front seat to Fixture For Seat Repair VAS 6136.
-
Remove bolts - 2 - (Qty. 4).
-
Remove bolt - 3 -.
-
Remove connector - 4 -.
-
Remove Drivers Seat Inclination Adjustment Motor V243 or V244 - 1 -.
Installing
Installation is reverse of removal. Observe the following when doing so:
CAUTION:
-
Observe safety precautions for work on airbags.
-
Before handling airbag units (e.g. disconnecting electrical connector), the person handling it must "electrostatically discharge". This can
be done by touching door striker, for example.