S6 Quattro Sedan V10-5.2L (BXA) (2007)
Seat Cover: Overhaul
Bench Seat Cover and Upholstery
Bench Seat Cover and Upholstery
Special tools, testers and auxiliary items required
‹› Upholstery clip pliers (V.A.G 1634)
1
Cover
‹› Removing
-
Remove seat bench => [ Bench Seat ] See: Service and Repair/Removal and Replacement/Rear Seats.
-
Cut the upholstery clips on the back side of the bench seat.
-
Pry out peripheral fastening strips with a screwdriver.
-
Life cover - 1 - off and cut upholstery clips - 4 -.
‹› Installing
To install, perform the steps used in removal in reverse order. When doing so, note the following:
-
When installing new upholstery clips, use Upholstery Clip Pliers (V.A.G 1634).
2
Upholstery