S6 Quattro Sedan V10-5.2L (BXA) (2007)
Brake Caliper: Overhaul
Brake Caliper, Servicing
Brake caliper, servicing
Note:
^
When performing repairs install all of the parts supplied in repair kit.
^
Apply thin coat of assembly paste G 052 150 A2 to brake cylinders, pistons and seals.
1. Self-locking bolt, 35 Nm
^
Always replace
^
When loosening and tightening, counter-hold at guide pin
2. Brake caliper housing with actuator
3. Bleeder valve, 10 Nm
4. Dust cap
^
Push onto bleeder valve
5. Sealing ring
6. Pressure nut
^
To operate parking brake
7. Pistons
8. Guide pins
^
Grease before pulling on protective cap
9. Protective cap
^
Pull onto brake carrier and guide pin