S6 Quattro Sedan V10-5.2L (BXA) (2007)
/Page-3616002.png)
-
Clean the contact surfaces on the wheel hub and brake disc. Remove any corrosion.
-
Place the brake disc on the hub.
‹› When positioning the brake disc, do not tilt it on the wheel hub.
-
Install the securing bolt - 8 - and tighten it to 10 Nm.
-
Install the brake caliper. Refer to=> [ Brake Caliper, Front Brake, RS 6 ] See: Brake Caliper, Front Brake, RS 6
-
Install the wheels.
