S6 Quattro Sedan V10-5.2L (BXA) (2007)
‹› Torque specification, 10 Nm
‹› Apply a thin coat of Lithium Grease to the threads before installing.
6 - Bushing
‹› Insert in brake caliper housing
7 - Brake caliper housing
8 - Retaining spring
‹› Observe correct installed position.
‹› Hook in at both brake caliper housing studs and at the outer brake pad retaining spring.
9 - Protective cap
‹› Do not damage when installing piston
‹› Coat with Lithium Grease
10 - Pistons
‹› Apply thin coat of Lithium Grease to piston beforehand
11 - Seal
‹› Coat with Assembly Paste