S6 Quattro Sedan V10-5.2L (BXA) (2007)
Always use new screws - 3 -.
-
Install the brake line inside the brake caliper and tighten it to 19 Nm.
The brake line - 5 - must fit securely in the bracket.
-
Connect the brake pad wear wire.
-
Install brake pads, refer to => [ Front Brake Pads, Ceramic Brakes ] See: Disc Brake System/Brake Pad/Service and Repair/Removal and
Replacement/Front Brake Pads, Ceramic Brakes.
-
Bleed brake system, refer to=> [ Bleeding Brake System ] See: Service and Repair
-
Install wheels.
-
Lower vehicle.