S6 Quattro Sedan V10-5.2L (BXA) (2007)
1
to the right front brake caliper"VR" (FR)
2
to the left rear brake caliper "HL" (LR)
3
to the right rear brake caliper "HR" (RR)
4
to the left front brake caliper "VL" (FL)
5
to the primary piston circuit "HZ 1"
6
to the secondary piston circuit "HZ 2 "
‹› Do not tighten bolts completely. This makes it easier to fasten the individual brake lines to the hydraulic unit.
-
Connect the connector to the hydraulics control module.
-
Push the red circlip downward.
Tighten all the brake lines to the hydraulic unit and master brake cylinder.
-
After tightening the brake lines, tighten the hydraulic unit - 1 -.