S6 Quattro Sedan V10-5.2L (BXA) (2007)
Coolant Line/Hose: Service and Repair
Front Lower Coolant Pipe, Removing and Installing
Front lower coolant pipe, removing and installing
Special tools, testers and auxiliary items required
^
Hose clamp pliers V.A.G. 1921
Removing
Note:
^
All cable ties opened or cut during engine removal must be reinstalled at the same locations during installation.
-
Drain coolant.
-
Disengage electrical connector - arrow - from bracket at left of lock carrier, connector is not disconnected.
-
Remove electrical connector - 3 - from bracket and free up electrical wiring.
-
Remove coolant hose - 1 - from front coolant line.
-
Remove bolts - 2 -.