S6 Quattro Sedan V10-5.2L (BXA) (2007)
-
Swivel cooler forward and remove upward.
Installing
Installation is performed in reverse order of removal, note the following:
-
Remove the old O-ring - 2 - in the coolant hose - 3 -.
-
Coat new O-ring with coolant and install it in the coolant hose.
-
Press the coolant hose onto the radiator - 1 - until it engages audibly.
-
Press the coolant hose on again and pull to make sure the connection is engaged correctly.
-
Install bumper and front bumper cover..
-
Fill with coolant => [ Filling ] See: Service and Repair/Procedures.
‹› Complete coolant must be replaced if the radiator was replaced.
Tightening Specifications