S6 Quattro Sedan V10-5.2L (BXA) (2007)
Radiator: Service and Repair
Left Auxiliary Cooler
Left Auxiliary Cooler
Removing
‹› If there are small impressions on the fins. Refer to => [ Coolers and Condensers ] See: Engine/Service and Repair/Removal and
Replacement/Coolers and Condensers.
-
Drain the coolant. Refer to => [ Cooling System, Draining and Filling ] See: Service and Repair/Procedures.
-
Remove front bumper cover.
-
Remove air duct - arrow - in front of left auxiliary cooler.
-
Remove bolts - 1 - and - 4 - and disengage auxiliary cooler downward from bracket.
-
Remove coolant hoses - 2 - and - 3 - and remove left auxiliary cooler.
‹› To improve clarity, the illustration is shown with headlamp removed.
Installing
Installation is in reverse order of removal, note the following:
‹› Secure all hose connections with hose clamps appropriate for the model.
-
Install the front bumper cover.