S6 Quattro Sedan V10-5.2L (BXA) (2007)
/Page-1807002.png)
-
Loosen quick-release fasteners - 1 - and - 2 - and remove noise insulation.
-
Place old oil collecting and extracting device V.A.G. 1782 under engine and drain engine oil.
-
Remove engine.
-
Separate engine and transmission.
-
Leave engine on Scissor Lift Table VAS 6131 or secure engine to assembly stand.
-
Insert guide pin of adapter T40058 so that small diameter - arrow 2 - points to engine. Large diameter - arrow 1 - points to socket.
-
Using Socket T40058, rotate crankshaft in direction of engine rotation - arrow - to "TDC".
-
Remove sealing plug - arrow - from upper part of oil pan.
CAUTION!
Do not turn crankshaft - 1 - while touching "TDC" hole with finger - Risk of injury.
