S6 Quattro Sedan V10-5.2L (BXA) (2007)
^
Large valve recesses - 1 - point toward center of engine.
Mark connecting rod
Note:
^
Only replace connecting rod as a set.
^
Do not interchange connecting rod bearings.
-
Before removing, mark allocation of connecting rod and connecting rod bearing caps to each other and to cylinder with paint - arrow -.
Connecting rod, installed location
^
Molded tabs - arrows - at the beveled surfaces of the connecting rod pairs 1 and 2, 3 and 4, 5 and 6, 7 and 8 as well as 9 and 10 must point toward
each other.
Oil spray jet for piston cooling
1. Oil spray jet
2. Bolts, 9 Nm. Insert using locking compound.
CAUTION!
^
Do not bend piston spray nozzles.
^
Bent piston spray nozzles must be replaced.