S6 Quattro Sedan V10-5.2L (BXA) (2007)
Oil Cooler: Service and Repair
Engine Oil Cooler
Special tools, testers and auxiliary items required
‹› Used Oil Collecting and Extracting Device (V.A.G 1782)
Removing
-
Drain the coolant. Refer to => [ Cooling System, Draining and Filling ] See: Cooling System/Service and Repair/Procedures.
-
Remove generator..
-
Remove bolts - arrows - and remove air generator bracket.
-
Remove the coolant hoses - 2 - and - 7 - from the engine oil cooler.
-
Place the Used Oil Collection and Extraction Device (V.A.G 1782) under the engine.
-
Remove the bolts - 1, 3, 4, 5 and 6 - and remove the engine oil cooler.
Installing
Installation is in reverse order of removal, note the following:
‹› Replace O-rings.
‹› Secure all hose connections with hose clamps appropriate for the model.