S6 Quattro Sedan V10-5.2L (BXA) (2007)
^
The threaded holes - arrows - in camshafts must face upward.
-
Mount camshaft locating tools T40070 to both cylinder heads and tighten bolts - arrows - to 25 Nm.
^
The camshaft locating tool T40070 is correctly positioned when the holes for the cylinder head bolts remain free.
-
Install Crankshaft Holder 3242 in bore and tighten to 20 Nm.
^
The crankshaft holder 3242 must engage in the locating hole of the crankshaft - 1 - otherwise repeat the adjustment.
-
Remove camshaft locating tools on both cylinder heads.
-
Remove crankshaft holder 3242.
-
Install "TDC" mark sealing plug with new seal in upper part of oil pan.
The rest of installation is in reverse order of removal, note the following:
-
Install left and right timing chain covers.
-
Install cylinder head cover.
-
Install engine.
Torque specifications