S6 Quattro Sedan V10-5.2L (BXA) (2007)
/Page-1940003.png)
-
Mount camshaft locating tool T40070 to both cylinder heads and tighten bolts - arrows - to 25 Nm.
^
The camshaft locating tool T40070 is correctly positioned when holes for the cylinder head bolts remain free.
-
Remove sealing plug - arrow - from upper part of oil pan.
CAUTION!
Do not turn crankshaft - 1 - while touching "TDC" hole with finger - Risk of injury.
-
Install crankshaft holder 3242 into hole to 20 Nm, if necessary rotate crankshaft very slightly back and forth to completely center the holder.
-
Press left camshaft timing chain tensioner glide track inward with a screwdriver - 1 - as far as stop and secure chain tensioner with Locking Pin
T40071.
Note:
^
The toothed belt tensioner is lubricated with oil and should only be compressed slowly by applying constant pressure.
