S6 Quattro Sedan V10-5.2L (BXA) (2007)
-
Mount the camshaft timing chains on the camshafts => [ Installing ] See: .
-
Install lower timing chain cover. Refer to => [ Lower Timing Chain Cover ] See: Timing Cover/Service and Repair/Lower Timing Chain Cover.
-
Install transmission-side crankshaft shaft seal. Refer to => [ Crankshaft Seal, Transmission Side ] See: Seals and Gaskets/Crankshaft Main Bearing
Seal/Service and Repair.
-
Install oil filter housing. Refer to => [ Oil Filter Housing ] See: Engine Lubrication/Oil Filter Housing/Service and Repair/Oil Filter Housing.
-
Install intake manifold.
-
Install left and right timing chain covers => [ Installing ] See: Timing Cover/Service and Repair/Left and Right Timing Chain Covers.
-
Install cylinder head cover. Refer to: Left => [ Left Cylinder Head Cover ] See: Cylinder Head Assembly/Valve Cover/Service and Repair/Left
Cylinder Head Cover, right => [ Right Cylinder Head Cover ] See: Cylinder Head Assembly/Valve Cover/Service and Repair/Right Cylinder Head
Cover.
-
Install drive plate. Refer to => [ Drive Plate ] See: Transmission and Drivetrain/Flex Plate/Service and Repair/Drive Plate.
-
After installing the engine, fill with oil and check the oil level.
Tightening Specifications