S6 Quattro Sedan V10-5.2L (BXA) (2007)
-
Install the Crankshaft Holder (3242) in the hole and tighten to 20 Nm. If necessary, rotate the crankshaft back and forth slightly to completely
center the holder.
-
Press left camshaft timing chain tensioner glide track inward with a screwdriver - 1 - as far as stop and secure chain tensioner with Locking Pin
(T40071).
‹› The toothed belt tensioner is lubricated with oil and should only be compressed slowly by applying constant pressure.
-
Press right camshaft timing chain tensioner glide track inward with a screwdriver - 1 - as far as stop and secure chain tensioner with Locking Pin
(T40071).