S6 Quattro Sedan V10-5.2L (BXA) (2007)
/Page-1955001.png)
Timing Cover: Service and Repair
Lower Timing Chain Cover
Lower Timing Chain Cover
Special tools, testers and auxiliary items required
‹› Hand drill with plastic brush attachment
‹› Protective eyewear
‹› Sealant.
Removing
‹› Engine and transmission separated. Refer to => [ Engine and Transmission, Separating ] See: Service and Repair/Removal and
Replacement/Engine and Transmission, Separating, engine on the Scissor Lift Platform (VAS 6131 A) or secured by the engine/transmission
holder, refer to => [ Engine, Securing to Engine and Transmission Holder ] See: Service and Repair/Removal and Replacement/Engine, Securing
to Engine and Transmission Holder.
‹› Engine oil drained.
-
Remove drive plate. Refer to => [ Drive Plate ] See: Transmission and Drivetrain/Flex Plate/Service and Repair/Drive Plate.
-
Remove left and right timing chain covers. Refer to => [ Left and Right Timing Chain Covers ] See: Left and Right Timing Chain Covers.
-
Remove intake manifold.
-
Remove oil filter housing. Refer to => [ Oil Filter Housing ] See: Engine Lubrication/Oil Filter Housing/Service and Repair/Oil Filter Housing.
-
Remove bolts - arrows -.
-
Remove the bolts - 1 through 13 - and then remove the lower cover for the timing chain from the bond.
-
Press the transmission side of the crankshaft shaft seal out of the lower timing chain cover.
Installing
