audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Air Intake Unit|Removal and Installation|Page 13478 > < Air Intake Unit|Removal and Installation|Page 13476
Page 2
background image

‹› Versions vary for vehicles with the Climatronic Control Module (J255) A/C control head in the "Comfort" or " Basic" version.

‹› In model year 2008, there is a rolling change in the threading at the screw points of the air distributor housing to the central tube of the

instrument panel (the cast metal inserts have been eliminated, the screws go directly into the plastic), ensure the proper screw version during
installation. 

2

Connecting Element (Shaft/Control Motor)

‹› Mark before removing (risk of interchange)

‹› Removing and installing => [ Connecting Elements to A/C Unit Doors ] See: Air Door/Service and Repair/Connecting Elements to A/C Unit

Doors

3

Defroster Door Motor (V107)

‹› With Defroster Door Motor Position Sensor (G135)

‹› Removing and installing => [ Defroster Door Motor ] See: Air Door/Air Door Actuator / Motor/Service and Repair/Defroster Door Motor

4

Screw

5

Connecting Element (to Control Motor)

‹› Mark before removing (risk of interchange)

‹› Removing and installing => [ Front Upper Body Outlet Motors ] See: Air Door/Air Door Actuator / Motor/Service and Repair/Front Upper

Body Outlet Motors

6

Right Chest Vent Control Motor (V238) (Comfort Version) or Left Chest Vent Control Motor (V237) (Basic Version)

‹› The name for this control motor depends on the version of the Climatronic Control Module (J255) A/C control head, it is different in the guided

troubleshooting and the wiring diagram of the " Comfort" version and "Basic" version.

‹› The Right Chest Vent Potentiometer (G388) is installed in the Right Front Chest Vent Control Motor (V238).

‹› The Left Chest Vent Potentiometer (G387) is installed in the Left Front Chest Vent Control Motor (V237).

-

In vehicles with the "Basic" version of the Climatronic Control Module (J255) A/C control head, left and right chest vent doors are operated by the
Left Chest Vent Door Motor (V237) (both left and right doors are connected to each other via a shaft) => [ Connection between Left and Right
Upper Body Outlet Door, Basic A/C

Unit ] See: Air Door/Air Door Cable/Service and Repair/Connection between Left and Right Upper Body Outlet Door, Basic A/C Unit.

‹› Removing and installing => [ Front Upper Body Outlet Motors ] See: Air Door/Air Door Actuator / Motor/Service and Repair/Front Upper

Body Outlet Motors.

7

Connecting Element (to Shaft)

‹› Mark before removing (risk of interchange)

‹› Removing and installing => [ Connecting Elements to A/C Unit Doors ] See: Air Door/Service and Repair/Connecting Elements to A/C Unit

Doors

8

Right Vent Temperature Sensor (G151)

‹› Removing and installing => [ Right Vent Temperature Sensor ] See: Discharge Air Temperature Sensor / Switch/Service and Repair/Right

Vent Temperature Sensor

9

Auxiliary Heater Heating Element (Z35)

‹› Not for North American market.

10

Rubber bushing

11

Screw

Air Intake Unit|Removal and Installation|Page 13478 > < Air Intake Unit|Removal and Installation|Page 13476