S6 Quattro Sedan V10-5.2L (BXA) (2007)
-
Remove the water drain - D - from the opening in the plenum chamber or air intake unit.
-
If necessary, remove the wiring harness, which is installed in the plenum chamber between the front wall and the air intake unit, from the various
holders.
-
Remove the air intake unit - E -.
Installing
Installation is carried out in the reverse order, when doing this note the following:
-
Check the seal - A - in the air intake unit - B - for damage and to ensure it is installed correctly.
-
Check both water drain grommets - G - for damage and deposits and clean if necessary.