S6 Quattro Sedan V10-5.2L (BXA) (2007)
/Page-5081004.png)
CAUTION!
The connecting rod - C - is engaged on the recirculation door lever - D -. This lever will break if it is bent over the connecting rod.
-
Check the connection between the connecting element - B - and the control motor shaft. The connecting element must be engaged.
-
Install bolts - A -.
-
Hand-tighten mounting bolts - A - (10 Nm).
-
Install the grommet - B - and wiring harness - A - according to the illustration.
